Pulling Cylindrical Roller Bearing Off Clutch Housing
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
-- When pulling circlip -arrow- off from roller bearing, compress it using pliers -C-.
Fig 1: Identifying Tool Assembly To Pull Off Cylindrical Roller Bearing Clutch Housing
Courtesy of AUDI OF AMERICA, LLC
A - Support, for example Kukko 22/2
B - Internal puller 30 to 37 mm, for example Kukko 21/5