Transmission Oil Pump Tightening Sequence

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transmission Oil Pump Tightening Specification And Sequence

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Different bolt versions -A or B-, observe tightening procedure.

-- Tighten bolts -arrows- in a diagonal sequence (different bolts depending on version):

Countersunk bolts -A- :

-- Tighten countersunk bolts to 8 Nm.

Flat head bolts -B- :

-- Tighten flat head bolts in 2 stages as follows:

-- Tighten bolts to 8 Nm.-- Tighten bolts an additional 90°.