Ignition Assembly Overview
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
- Knock Sensor I -G61-
- Contacts gold plated
- Knock Sensor 2 -G66-
- Contacts gold plated
- Ignition Coil with Power Output Stage
- Removing and installing, refer to IGNITION COILS WITH POWER OUTPUT STAGES
- To remove, use the ignition coil puller T40039
- Spark Plug
- 30 Nm
- To remove, use the Spark Plug Removal Tool 3122 B
- Bolt
- 20 Nm
- Tightening specifications affect function of Knock Sensor
- Bolt
- 10 Nm
- Camshaft Position Sensor -G40-
- Contacts gold plated
- O-Ring
- If damaged, replace O-ring