Removal Instructions For Dual-Mass Flywheel
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To prevent damaging the dual-mass flywheel when removing, the bolts -B- must not be removed using an air or impact driver. Removal of the bolts is only permissible by hand.
-- Turn the dual-mass flywheel -A- so that the bolts are positioned centrally to the bores -arrows-.
-- When removing the bolts, make sure that no bolt head contacts the dual-mass flywheel, otherwise it may be damaged when the bolt is turned further.