LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Clutch - Manual Transmission 02Q (AWD) (Roadster)) >> 30 Clutch >> Description And Operation >> Pedal Assembly, Master Cylinder Assembly Overview >> Impact Bolster - Tightening Specification

Impact Bolster - Tightening Specification

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Crash Brace - Tightening Specification
GWWA30-10001Courtesy of AUDI OF AMERICA, LLC

-- Insert impact bolster -2- and tighten 1 or 2 screws -B arrows- depending on the version.

scientia non olet · About LEMON Manuals