Camshafts, Checking Axial Clearance
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Dial Gauge Holder VW 387
- Dial Gauge 0-10 mm VAS 6079
Test Sequence
-- Perform measurement with guide frame removed.
-- Place camshaft to be checked in guide frame.
-- Secure the VAS 6079 to cylinder head with VW 387.
-- Press camshaft against dial gauge by hand.
-- Set dial gauge to "0".
-- Press camshaft off dial gauge and read the value:
- Axial clearance: 0.05 to 0.17 mm.