LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (2.0L - Exhaust System, Emission Controls - Engine Code(S): BPY (Roadster) (As Of 10.2010)) >> 26 Exhaust System, Emission Controls >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
Component Bolt Size Nm
Bracket for Exhaust System, Bolt/Nut (1) - 23
Bracket for Exhaust System, Nut (2) - 20
Front Exhaust Pipe with Catalytic Converters and Front Muffler, Nut (3), (4) - 40
Oxygen Sensor(5) - 55
Suspended Mount - 23
Tunnel Brace - 23
(1) For bolt tightening clarification, refer to EXHAUST SYSTEM OVERVIEW  and see item -2-
(2) For bolt tightening clarification, refer to EXHAUST SYSTEM OVERVIEW  and see items -5-
(3) Always replace
(4) Coat turbocharger stud bolts with hot bolt paste
(5) Use hot bolt paste to grease threads
scientia non olet · About LEMON Manuals