Instrument Cluster And Clock Receiver Overview
NOTE:
All warning lamps in instrument cluster are fitted with light-emitting diodes. In case an indicator lamp is malfunctioning, the instrument cluster must be replaced.
- Screw
- 2.5 Nm
- Instrument Cluster
- With the instrument cluster control module -J285-.
- Removing and installing, refer to INSTRUMENT CLUSTER .
- Electrical connector
- For instrument cluster.
- Screw
- 2.5 Nm
- Gap Cover
- Removing and installing, refer to Storage Compartments and Covers in Removal and Installation .
- Screw
- 2.5 Nm
- Electrical Connector
- For Radio Frequency Controlled Clock Receiver -J489-.
- Screw
- 2.5 Nm
- Radio Frequency Controlled Clock Receiver -J489-
- Removing and installing, refer to RADIO FREQUENCY CONTROLLED CLOCK RECEIVER -J489- .