Camshaft Adjuster, Removing And Installing: Removing

Cylinder Bank 1 (Right): 

-- Remove the engine cover, refer to ENGINE COVER, REMOVING AND INSTALLING .

Vehicles with the Engine Codes CEUA/CTGA: 

Fig 1: Removing Camshaft Adjustment Valve 1 -N205 - / Exhaust Camshaft Adjustment Valve 1 -N318-, Removing And Installing, Cylinder Bank 1 (Right)

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the clamps -arrows- and remove the air guide pipe.

Vehicles with the Engine Codes CGTA/CTFA: 

Fig 2: Removing Air Guide Pipe (Engine Codes CGTA/CTFA)

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the clamps -arrows- and remove the right air guide pipe.

Continued for Both Sides: 

Fig 3: Locating Connector And Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

-- Remove the bolt -1- and then remove the camshaft adjuster.