Engine Cover Temperature Sensor -G765-, Removing And Installing: Removing
-- Remove the engine cover, refer to ENGINE COVER, REMOVING AND INSTALLING .
WARNING:
Fire hazards and risk of damage for a faulty engine cover.
- The engine cover must be always be installed before the hood is closed.
- The engine may neither be started nor driven without an engine cover.
Engine Codes CEUA/CTGA:
-- Loosen the clamps -arrows- and remove the air guide pipe.
Continuation for All Vehicles:
-- Disconnect the connector -1-.
-- Remove the bolt -2- and then remove the Engine Cover Temperature Sensor -G765-.