Charge Air Cooler Housing, Removing And Installing: Installing
Install in reverse order of removal. Note the following:
NOTE:
Replace the seals
Secure all hose connections with hose clamps of the same type as those equipped by the factory.
-- Install the Throttle Valve Control Module -J338-, refer to Throttle Valve Control Module -J338-, REMOVING AND INSTALLING .
-- Install the air filter housing, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
NOTE:
Do not reuse used coolant.
-- Fill the coolant, refer to COOLANT, DRAINING AND FILLING => Filling .