OVERVIEW - REAR LID, Rear Lid Motor 2 -V445-, MOTOR WORM GEAR

Fig 1: Identifying Rear Lid Overview

Courtesy of AUDI OF AMERICA, LLC

1. Rear Lid Motor 2 -V445-
   • Disengage the coupling rod (refer to REAR LID DRIVE COUPLING ROD, REMOVING AND INSTALLING ) and the gas-filled strut (refer to GAS-FILLED STRUT, REMOVING AND INSTALLING ).
   • Removing and installing. Refer to Rear Lid Motor 1 -V444- AND Rear Lid Motor 2 -V445-, REMOVING AND INSTALLING .
2. Rear Lid Drive Motor Tilting Mechanism
   • Removing. Refer to Rear Lid Motor 1 -V444- AND Rear Lid Motor 2 -V445-, REMOVING AND INSTALLING .
3. Coupling Rod
   • Removing. Refer to REAR LID DRIVE COUPLING ROD, REMOVING AND INSTALLING .
4. Screw
   • 21 Nm
5. Connector
6. Bolt
   • 21 Nm

Fig 2: Removing/Installing Rear Lid Buzzer

Courtesy of AUDI OF AMERICA, LLC

-- Remove the right luggage compartment side trim panel. Refer to Luggage Compartment Trim Panels .

-- Disconnect the connector -1-.

-- Loosen the buzzer -3- in direction of -arrow A- and remove it from the mount -2- -arrow B-.