Overview - Fuel Filler Door Unit
- Drain Hose
- Make sure the routing is correct. Refer to FUEL FILLER DOOR DRAIN HOSE .
- Emergency Release Cable
- Bolts
- 1.5 Nm
- Fuel Filler Door Unlock Motor -V155-
- Removing:
-- The fuel filler door is removed.
-- Pull the Comfort System Central Control Module -J393- into the luggage compartment and pull it forward.
-- Remove the Fuel Filler Door Unlock Motor -V155- forward off the body flange and disconnect the electrical connector.
- Installing:
-- Slide the Fuel Filler Door Unlock Motor -V155- onto the flange and slide the emergency release into the luggage compartment.
- Removing:
- Fuel Filler Door Cover
- Fuel Filler Door
- Must be replaced after removing.
-- Bolt the door and the door release motor together using the bolt -4-.
-- Guide cable through opening in fuel filler door cup.
-- Insert fuel filler door diagonally until catches on protruding flange engage in side panel.
- Must be replaced after removing.