Left Camshaft Timing Chain
WARNING: This page is about a different car, the 2015 Audi A6 Quattro, 2014 Audi A6 Quattro, 2013 Audi A6, and 2012 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 80 Nm +90°
- Replacing
- Bolt
- 80 Nm +90°
- Replacing
- Camshaft Chain Sprocket
- For the exhaust camshaft
- Removing and installing, refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Camshaft Adjuster
- For the intake camshaft
- Identification "Intake"
- Removing and installing, refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .NOTE:
Depending on the version the camshaft adjuster has three or four notches. The illustration shows a camshaft adjuster with four notches.
- Left Camshaft Timing Chain
- Mark the running direction with paint for reinstallation
- Remove from the camshafts, refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Removing and installing, refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Glide
- Chain Tensioner
- For the left camshaft control chain
- Removing and installing, refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Bearing Plate
- For the drive chain sprocket
- Bolt
- Tightening specification -item 10- in OVERVIEW - TIMING MECHANISM DRIVE CHAIN .
- Drive Chain Sprocket
- For the left camshaft control chain
- Mounting Pin
- Left camshaft timing chain drive sprocket
- Bolts
- Tightening specification -item 3- in OVERVIEW - TIMING MECHANISM DRIVE CHAIN .