Seat bench cover and upholstery, removing and installing
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The technical construction of rear Recaro seats is identical to that of rear seats with divided backrests.
- The rear Recaro seats are only differentiated from standard seats by covers and upholstery. Differences for the positions of cushion grip channel and plastic clips of covers are possible.
The following cross references serve for orientation:
- Cover and upholstery for rear seatbench, removing and installing → Seat bench cover and upholstery, removing and installing .
- Cover and cushion for 1/3 rear backrest, removing and installing.
- Cover and cushion for 2/3 rear backrest, removing and installing.
- Headrest guide, removing and installing:
- Headrest guides with slide in locking mechanism → Headrest guides with insertion lock, removing and installing
- Outer headrest guides without slide in locking mechanism → Outer headrest guides without insertion lock, removing and installing
- Inner headrest guides without slide in locking mechanism → Inner headrest guides without insertion lock, removing and installing
- Removing and installing ski sack → Ski sack, removing and installing (folding rear seat backrest) .