Oil Spray Jets, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Torx Bit - T40 :T10545
Wrench - 21mm :T40263
Adapter :T40314

Cylinder "1 to 3" :

Transmission removed. Refer to the appropriate Service Information .

-- Remove the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

- Only let the engine turn in the direction of engine rotation.

-- Turn the crankshaft with the : T40263 , :T40314 and the 24 mm socket in direction of -arrow- until the corresponding bolt is accessible.

Removing Cylinder "4" :

The engine is removed and secured to the engine/transmission holder. Refer to ENGINE, SECURING TO ENGINE AND TRANSMISSION HOLDER .

-- Remove the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .

-- Remove the balance shaft timing chain. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .

-- Remove the connecting rod bearing cap.

-- Remove the crankshaft bearing cap.

-- Remove the crankshaft.

Continued for All Cylinders:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the pressure relief valve -1- using the :T10545 .

-- Remove the oil spray jet -2-.