Vibration Damper, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Counterhold - Vibration Damper :T10355
- Vibration Damper Assembly Tool :T10531
- Wrench - 21mm :T40263
- Adapter :T40314
- 24 mm Socket
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Vibration Damper
Individual Components of the :T10531 :
- Vibration Damper Assembly Tool - Counterhold Tool :T10531/1
- Vibration Damper Assembly Tool - Tensioning Pins :T10531/2
- Vibration Damper Assembly Tool - Turning Over Tool :T10531/3
- Vibration Damper Assembly Tool - Knurled Nut :T10531/4
- The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt, the chain sprocket must be secured to the crankshaft as described in the following.