Sub-Assembly Bracket, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Depending on the model, preliminary work may be required. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .

-- Remove the oil filter. Refer to ENGINE OIL .

-- Place a cloth under the sub-assembly bracket to catch any escaping engine oil.

-- Remove the bolt -arrow- for the oil dipstick tube.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 5- and pull off the sub-assembly bracket from the coolant pump housing.

NOTE:

There are different designs depending on the engine.