Vacuum Pump, Removing And Installing, 2.7L TDI And 3.0L TDI Diesel Engine: Installing

Make sure the seal is correctly installed.

-- Install the vacuum line on the removed vacuum pump.

Make sure it is installed in the correct position

-- Position the vacuum pump tappet so it engages in the groove on the camshaft when vacuum pump is installed.

-- Insert the vacuum pump.

-- Make sure the seal is seated correctly.

-- Install and tighten all the bolts on the vacuum pump sealing flange, refer to Figure, -item  1- Bolt.

-- Place the vacuum line into the plenum chamber bulkhead.

-- Connect the vacuum line and vacuum hose behind the plenum chamber bulkhead.

-- Install the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .

-- Install the engine cover.