Overview - Cover And Padding, Fixed Rear Seat Backrest

Fig 1: Overview Of Cover And Padding, Fixed Rear Seat Backrest

Courtesy of AUDI OF AMERICA, LLC

1. Retaining Channel
   • Sewn into cover
   • For engaging the cover in the seat frame
2. Cover
   • Removing and installing. Refer to COVER AND PADDING, REMOVING AND INSTALLING, FIXED REAR SEAT BACKREST .
   • Separate the cover from the padding. Refer to COVER AND PADDING, SEPARATING, BACKREST WITH COVER OR STORAGE COMPARTMENT 
3. Retaining Channel
   • Sewn into cover
   • For engaging the cover in the seat frame
4. Molding
   • Sewn into cover
   • For engaging the cover in the seat frame
5. Cushion
   • Removing and installing. Refer to COVER AND PADDING, REMOVING AND INSTALLING, FIXED REAR SEAT BACKREST .
   • Separate the cover from the padding. Refer to COVER AND PADDING, SEPARATING, BACKREST WITH COVER OR STORAGE COMPARTMENT 
6. Backrest frame
7. Headrest Guide
   • Removing and installing. Refer to HEADREST GUIDE, REMOVING AND INSTALLING .
8. Clip
   • Covered in foam padding
9. Cushion Clip
   • Only with leather covers
   • for securing the cover to the padding
   • Always replace if removed
   • Install in same location as before removal
10. Retaining Channel
    • Sewn into cover
    • For securing the cover to the padding
11. Contour Wire
    • Pushed into the cover