Overview - Cover And Padding, Bench Seat Without Center Storage Compartment

Fig 1: Overview Of Bench Seat Without Center Storage Compartment

Courtesy of AUDI OF AMERICA, LLC

1. Cover
   • Removing and installing. Refer to COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITHOUT CENTER STORAGE COMPARTMENT .
   • Separate the cover from the padding. Refer to COVER AND PADDING, SEPARATING, BENCH SEAT WITHOUT CENTER STORAGE COMPARTMENT 
2. Contour Wire
   • pushed into the cover
3. Cushion
   • Removing and installing. Refer to COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITHOUT CENTER STORAGE COMPARTMENT .
   • Separate the cover from the padding. Refer to COVER AND PADDING, SEPARATING, BENCH SEAT WITHOUT CENTER STORAGE COMPARTMENT 
4. Molding
   • sewn into cover
   • for engaging the cover in the seat bench frame
5. Clip
   • Covered in foam padding
   • Only with fabric covers
6. Seat Bench Frame
7. Cushion Clip
   • Only with leather covers
   • For securing the cover to the padding
   • Always replace if removed
   • Install in same location as before removal
8. Clip
   • Covered in foam padding