4-Cylinder 2.0L TFSI And 2.0L TFSI Hybrid Gasoline Engines: Removing

-- Remove engine cover. Refer to 2.0 TFSI GASOLINE ENGINE .

-- Open both screws on the connector strip.

-- Using the Puller T40039 remove all the ignition coils approximately 30 mm out of the spark plug shaft.

Fig 1: Identifying Ignition Coil Puller T40039

Courtesy of AUDI OF AMERICA, LLC

-- Release the connector and pull all the connectors at the same time from the ignition coils.

-- Remove spark plugs using Spark Plug Wrench 3122B.