Left Seal, Replacing, 0BC: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi S6, 2015 Audi A6 Quattro, 2014 Audi S6, 2014 Audi A6 Quattro, and 2013 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
-- General Repair Instructions. Refer to REPAIR INFORMATION .
-- Remove the rear final drive. Refer to FINAL DRIVE .
Remove Right Flange Shaft
-- Attach the PullerT10037 to the housing -arrow- and remove the flange shaft.
Left Flange Shaft, Removing
-- Attach the PullerT10037 to the housing -arrow- and remove the flange shaft.
-- Use a suitable tool to pry out the seal.