LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Rear Final Drive 0BC, 0BD, 0BE & 0BF) >> 39 Final Drive, Differential >> Removal And Installation >> Hydraulic Control Module, 0BE, 0BF >> Removing >> Loosen the left -6- and right -7- lines to the hydraulic control unit -1- one turn -arrows A- and remove them from the chambers -arrows B-.

Loosen the left -6- and right -7- lines to the hydraulic control unit -1- one turn -arrows A- and remove them from the chambers -arrows B-.

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi S6, 2015 Audi A6 Quattro, 2014 Audi S6, 2014 Audi A6 Quattro, and 2013 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Hydraulic Control Unit
GWWA39-10376Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2 through 5- and remove the hydraulic control unit -1- with the seal.