Stabilizer Bar: Removing

-- Remove Noise Insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING / OVERVIEW - NOISE INSULATION .

Vehicles Through 08.07 

Fig 1: Identifying Stabilizer Bar And Nuts & Clamps

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect left and right connectors -2-.

-- Remove the left and right nuts -1- and remove the clamps -3-.

-- Remove the stabilizer bar.

Vehicles From 09.07 

Fig 2: Identifying Nuts (Install But Do Not Tighten)

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect left and right connectors -2-.

-- Remove the left and right nuts -1- and remove the clamps -3-.

-- Remove the stabilizer bar.