Installed Position And Tightening Sequence

Fig 1: Installing Diagonal Brace (-Arrow- Faces Direction Of Travel)

Courtesy of AUDI OF AMERICA, LLC

-- Install the diagonal brace (-arrow- faces the direction of travel).

-- First tighten the bolts to 5 Nm in sequence -1, 2 and 3- and then tighten them to the final tightening specification.

Tightening specifications, refer to SUBFRAME, CROSSBRACE, DIAGONAL BRACE, STABILIZER BAR, COUPLING ROD AND SUBFRAME SHIELD OVERVIEW, FROM 09.2007 .