Overview - Seat Pan, Seat Angle Adjuster

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Seat Angle Adjuster (Manual). Refer to OVERVIEW - SEAT PAN, SEAT ANGLE ADJUSTER

Seat Angle Adjustment Motor. Refer to OVERVIEW - SEAT PAN, SEAT ANGLE ADJUSTER

Seat Angle Adjuster (Manual)

Fig 1: Seat Pan, Seat Angle Adjuster Exploded View

Courtesy of AUDI OF AMERICA, LLC

Handle
- For seat inclination adjustment
- Removing and installing. Refer to SEAT ANGLE ADJUSTMENT HANDLE, REMOVING AND INSTALLING .
- Press until it engages completely
Clip
- Replace the seat angle adjustment handle each time it is removed
- Installed position. Refer to Installing
Bolt
- 6.5 Nm
- Self-locking
- Replace
- Threaded holes for bolts must be cleaned, for example, with a thread tap
Shoulder Pin
- 6 Nm
- Self-locking
- Replace
- Threaded hole for shoulder pin must be cleaned, for example, with thread cutter
Seat Angle Adjuster
- Removing and installing. Refer to SEAT ANGLE ADJUSTER, REMOVING AND INSTALLING .

Seat Angle Adjustment Motor

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 20 Nm
- Self-locking
- Replace
- Clean the threaded hole with a thread tap.
Seat Pan
Driver Seat Angle Adjustment Motor -V243-
- Front passenger side: Front Passenger Seat Angle Adjustment Motor -V224-
- Removing and installing. Refer to SEAT ANGLE ADJUSTMENT MOTOR, REMOVING AND INSTALLING .
Bolts
- 10 Nm
- Quantity: 2
- Self-locking
- Replace
- Threaded holes for bolts must be cleaned, for example, with a thread tap