Rear Three Point Seat Belt In Rear Seat Backrest, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bench seat. Refer to SEAT BENCH/SINGLE SEAT, REMOVING AND INSTALLING .
-- Remove the right 2/3 rear seat backrest. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .
-- Remove the backrest cover and backrest cushion from the rear seat bench. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, DIVIDED REAR SEAT BACKREST .
Versions with Rear Seat Belt Tensioner Igniter
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
- Follow all regulations when disposing of pyrotechnic components. Refer to AIRBAG, BELT TENSIONER AND BATTERY CUT-OUT UNITS, STORING, TRANSPORTING AND DISPOSING (PYROTECHNIC COMPONENTS) .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Disconnect the connector -4-.
-- To do this, release the connector lock -3- using a small screwdriver -1- and remove the electrical connector -2-.
Continuation for All Vehicles
-- Remove the nut -1-.
-- Disengage the three-point seat belt -2- and remove it.
-- Guide out the seat belt -3-.