Rear Seat Belt Guide In Rear Seat Backrest, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear belt end fitting in the center. Refer to REAR SEAT BELT LATCH, REMOVING AND INSTALLING .
-- Release the catches -1- by inserting a screwdriver from above through the hole in the belt guide.
-- At the same time, unclip the seat belt guide -2- using the :3409 -arrow-.
-- Thread the seat belt webbing out and remove the seat belt guide.