Wheel Hub, Pressing in Wheel Bearing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Handling the wheel bearing. Refer to Removing .

-- Arrange the special tools as shown.

:VW412
:VW402
Wheel Hub
Wheel Bearing
:VW401

The reworked surface of the wheel bearing outer race faces down.

CAUTION:

There is a risk of damaging or contaminating the wheel bearing.

When setting down or pressing in, make sure there is no dirt or contaminants between the :VW401 and the wheel bearing.

-- Press the wheel hub into the wheel bearing.

-- Install the wheel bearing unit. Refer to WHEEL BEARING UNIT, REMOVING AND INSTALLING .