LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Hydraulic Components - Brake System (Coupe)) >> 47 Hydraulic Components >> Removal And Installation >> Vacuum Pump >> Brake System Vacuum Pump -V192-, RS 5 >> Notes

Brake System Vacuum Pump -V192-, RS 5: Notes

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

It is necessary to remove the left front wheel housing liner in order to remove the brake system vacuum pump -V192-, refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

The construction of brake system vacuum pump -- depends on the engine.

The brake system vacuum pump -- is switched on by the engine control module depending on the intake line pressure.

Brake system vacuum pump -- is not intended to be serviced. In case of complains, determine cause with help of function or seal test. If there is a malfunction, replace electrical vacuum pump.