Rear Brakes Guide Pins And Protective Caps, Replacing: Installing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Grease the guide pin before inserting.
-- Slide the protective cap over the groove on the guide pin.
-- Slide the guide pin -8- with the protective cap -9- through the brake carrier.
-- Press the protective cap over the groove on the brake carrier.
-- Insert the brake caliper.
-- Install the bolts -1- and tighten them.