Rear Brake Caliper Piston: Removing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove pistons as far as possible from brake caliper.
-- Force piston out of brake caliper housing using compressed air.
NOTE:
Be careful not to damage the surface of the cylinder while removing the seal.
Place a wooden board into the recess of the caliper housing so it is not damaged.
-- Remove old seal from brake caliper with 3409.