Front Brake Caliper Piston, 1LA/1LJ: Removing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Assembly paste G 052 150 A2
- Trim Removal Wedge 3409
- Piston Resetting Tool T10145
-- Force piston from brake caliper housing using compressed air.
NOTE:
Place a wooden board into the recess of the caliper housing so it is not damaged.
-- Remove seal.
-- Use the 3409 for this.
NOTE:
Be careful not to damage the surface of the cylinder while removing the seal.