Check Valve, RS 5: Installing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Make sure the check valve is installed correctly. The arrow on the valve points to the pump.
Valve must allow air to flow in direction of arrow.
the arrow indicates the direction of the vacuum pump.
-- Push the left and right vacuum hose onto the check valve -3-.
NOTE:
Moisten the vacuum hose with water to make it easier to install.
-- Slide the new clamp over the vacuum hose.
-- Push the vacuum hose onto the pump.
-- Close the hose clamp with pliers.