Removal And Installation

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Individual lock cylinders are repaired by discarding the inoperative lock cylinder and building a new lock cylinder using the appropriate lock repair package. The lock repair package includes a detailed instruction sheet to build the new lock cylinder to the current code of the vehicle.

1.

Remove the exterior front door handle. For additional information, refer to Exterior Front Door Handle .

2.

Remove the retainer and the front door lock cylinder.

3.

To install, reverse the removal procedure.