Vehicle Diagnostic Tester Vas 5051B/ 5052 Connecting And Selection Functions

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Vehicle Diagnostic Tester

-- Connect the VAS 5051/5a diagnostic cable connector to diagnostic connection.

Fig 1: Connecting Diagnostic Cable VAS 5051/5A To Diagnostic Connector

Courtesy of AUDI OF AMERICA, LLC

-- Switch tester on.

The tester is ready for use when the vehicle symbol is displayed.

-- Turn on the ignition.

-- Touch the field / the button on the screen: Guided Fault Finding.

-- Select in succession:

Brand
Type
Model year
Version
Engine Code

-- Confirm data entered.

Wait until tester has checked all control modules in vehicle.

-- Press the go to button and select "function/component selection".

-- Select "suspension" on the display.

-- Select "brake system" on the display.

-- Select "001 - OBD-capable system" in the display.

-- Select on display "Antilock brake system...".

-- Select on display "Function".

Now, all possible functions of the anti-lock brake system installed in the vehicle will be displayed.

-- Select desired function on display.