Brake Caliper, Replacing: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Replace Bolts

-- Slide the brake caliper over the brake rotor.

-- Install the bolts -10- and tighten them to 196 Nm.

-- Install brake pads, refer to BRAKE PADS .

-- Bleed brake system, refer to BRAKE SYSTEM, BLEEDING .

-- Mount the wheels, refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

CAUTION:

After inserting brake pads and before driving for the first time, press brake pedal strongly several times while parked so that brake pads are properly seated in their normal operating position.

-- Check brake fluid level, and fill if necessary.

CAUTION:

Make sure the brakes are working correctly before driving the vehicle for the first time.