Front Brake Caliper, Replacing: Installing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Always use new bolts .
-- Position the brake carrier.
-- Tighten the brake carrier with new bolts -5-.
-- Install the brake hose into the brake caliper and tighten.
-- Install brake pads, refer to BRAKE PADS .
NOTE:
After replacing the brake pads, press the brake pedal firmly several times while the vehicle is stationary so that the brake pads are seated properly in their normal operating position.
-- Remove V.A.G 1869/2.
-- Bleed brake system, refer to BRAKE SYSTEM, BLEEDING
-- Mount the wheels.
Wheel bolt tightening specification, refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .