Front Brake Caliper With Brake Carrier: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Use new bolts.

-- Carefully press the brake caliper with the brake carrier and the brake pads installed over the brake rotor.

-- Tighten the brake carrier with new bolts -1-.

Fig 1: Freeing Up Electrical Connector

Courtesy of AUDI OF AMERICA, LLC

-- Insert the brake hose in the bracket -4-.

-- Insert the electrical wire in the bracket -2- and engage it to the right -B-.

-- Mount the wheels.

Wheel bolt tightening specification, refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

-- Lower the vehicle.