Fastener Tightening Specifications: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Bolt Size | Nm |
|---|---|---|
| Base Block for the Shift Lever Support Nut | - | 8 |
| Center Differential Housing1 | ||
| -Aluminum Bolts2 | - | 10 + 90° |
| -Steel Bolts | - | 24 |
| Clamping Plate | - | 23 |
| Connecting Rod | - | 20 |
| Driveshaft Heat Shield to Center Differential Housing | - | 25 |
| Gearshift Lever2 | - | 20 |
| Joint Piece between the Selector Rod and Shift Lever | ||
| Nut | - | 10 |
| Bolt | - | 23 |
| Lower Stop for the Transmission Mount2 | - | 20 + 90° |
| Mount for the Shift Lever Support, Nut | - | 8 |
| Transmission Support | ||
| Nut | - | 20 |
| Bolt | - | 40 |
| Oil Filler Plug | - | 40 |
| Push Rod | - | 20 |
| Sealing Boot | - | 4 |
| Shift Lever Support | - | 23 |
| Transmission Fluid Filler Plug | - | 40 |
| Transmission Range Gear Recognition Switch -F208- to the Transmission | - | 20 |
| Transmission Shift Lever Nut | - | 20 |
| Selector Shaft Cover | - | 24 |
| Tunnel Crossmember | ||
| Nut | - | 20 |
| Bolt | - | 70 |
| Bolts and Nuts | ||
| M6 | 9 | |
| M7 | 15 | |
| M8 | 20 | |
| M10 | 40 | |
| M12 | 65 | |
|
||