Transmission Mount: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

For the correct tightening specifications, refer to TUNNEL CROSSMEMBER, TRANSMISSION MOUNT AND TRANSMISSION SUPPORT OVERVIEW .

-- Mount the transmission support -3- on the transmission mount -5- and tighten the nut -4- hand-tight.

-- Tighten the lower stop -2- with the bolts -1-.

-- Tighten the nut -4-.

-- Install the transmission support and transmission mount. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT .