Noise Insulation: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Mount the noise insulation on the tabs -1- and then push down on it until the tabs -2- lock.

Fig 1: Mounting Noise Insulation On Tabs -1- And Then Push Down On It Until Tabs -2- Lock

Courtesy of AUDI OF AMERICA, LLC

-- Stretch the boot over the shift lever into the rounded groove -arrow A-.

-- Press the support ring into the boot over the shift lever support in the direction of -arrow B- as far as the stop.

Install in reverse order of removal paying attention to the following:

-- Install the multimedia system control head. Refer to MULTIMEDIA SYSTEM CONTROL HEAD -E380-, REMOVING AND INSTALLING .

-- Install the shift lever knob with the shift lever boot. Refer to SHIFT KNOB WITH SHIFT LEVER BOOT .