Gearshift Knob With Gearshift Lever Boot Overview

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Gearshift Knob With Gearshift Lever Boot

Courtesy of AUDI OF AMERICA, LLC

Gearshift Knob
- With shift lever boot
- Removing and installing, refer to SHIFT KNOB WITH SHIFT LEVER BOOT
Clamp
- Secures the shift lever knob to the shift lever
- Attach using hose clamp pliers V.A.G 1275
Boot
- Available only together with the support ring GEARSHIFT KNOB WITH GEARSHIFT LEVER BOOT OVERVIEW
- Remove and install together with the noise insulation GEARSHIFT KNOB WITH GEARSHIFT LEVER BOOT OVERVIEW NOISE INSULATION
Support Ring
- Available only together with the boot GEARSHIFT KNOB WITH GEARSHIFT LEVER BOOT OVERVIEW
Noise Insulation
- Removing and installing, refer to NOISE INSULATION
Gasket
Nut
- 8 Nm
Mount
- For the shift lever support
Shift Lever with Shift Lever Support