Crankcase ventilation hose, removing and installing

WARNING: This page is about a different car, the 2008 Audi RS 4 and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove intake manifold → 24 - MULTIPORT FUEL INJECTION (MFI) .

Fig 1: Removing Bolt And Crankcase Ventilation Hose From Cover

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove bolt - arrow - and remove crankcase ventilation hose - 1 - from cover - 2 -.

Installing

Installation is in reverse order of removal, note the following:

NOTE:

Replace O-ring.

Install intake manifold → 24 - MULTIPORT FUEL INJECTION (MFI) .

Torque specifications

Component	Nm
Crankcase ventilation hose to cover	9