Checking piston

WARNING: This page is about a different car, the 2008 Audi RS 4 and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Checking Piston

GW00000054

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Measure approx. 15 mm from lower edge, at a 90 ° angle to piston pin axis using an external micrometer 75 to 100 mm.

Maximum deviation from nominal dimension: 0.03 mm.

Nominal dimension → Piston and cylinder dimensions .