Coolant Fan Control Module -J293-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front noise insulation, refer to OVERVIEW - NOISE INSULATION .

-- Remove the coolant fan connector -1- from the bracket and disconnect it by sliding the retainer back -arrow- and pressing the release down.

Fig 1: Disconnecting Coolant Fan Electrical Connector -1- From Bracket

Courtesy of AUDI OF AMERICA, LLC

-- Free up the electrical wiring harness to the coolant fan control module.

-- Disconnect the connectors -2 and 3-.

Fig 2: Coolant Fan Control Module -J293- & Connectors

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- and the coolant fan control module -1-.