Windshield Washer Fluid Reservoir, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specifications and sequence, refer to Figure.
-- When inserting the washer fluid reservoir, make sure the securing tab -1- engages in the mount -2- on the fender.
Install in reverse order of removal. Note the following:
-- Install the left front wheel housing liner, refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Install the washer fluid reservoir filler neck, refer to WASHER FLUID RESERVOIR FILLER TUBE, REMOVING AND INSTALLING .