LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 667 (Wheels & Tire - General Information) >> 44 Wheels, Tires, Wheel Alignment >> Run-Flat Tires >> Tires With Emergency Running Characteristics, Pax >> Tires With Emergency Running Characteristics (Pax), Repairing

Tires With Emergency Running Characteristics (Pax), Repairing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

General Information 

It is generally not necessary to replace a tire after going flat and after driving on a flat tire.

NOTE:

The affected tire should be removed and checked for damaged by trained professionals. Assembly work and damage diagnosis on the affected tire should only be performed by trained personnel.

Proceed as follows to examine a tire with emergency running characteristics (PAX) after going flat:

-- First, the remaining gel must be removed from the tire. The flat side of the spatula is suitable for this

-- Then clean the tire and supporting ring with water and a cloth to remove the remaining gel residue

-- After separating tire and supporting ring, evaluate both of these components (PAX) according to the criteria described in the following service information

Additional information: 

-- When remounting, ensure the used supporting ring fits the tire and rim dimensions

-- The rim must be inspected before mounting, as with conventional wheel/tire systems

-- A damaged rim should be replaced