LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 659 (Controls & Housing - Automatic Transmission 0BK) >> 37 Controls, Housing >> ATF Circuit >> Automatic Transmission Fluid Lines, Cleaning

Automatic Transmission Fluid Lines, Cleaning

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

Procedure 

NOTE:

Adhere to guidelines for clean working conditions when working on the automatic transmission, refer to CLEAN WORKING CONDITIONS, GUIDELINES .

-- Before installing a replacement transmission, always clean out the ATF cooler and ATF pipes using compressed air (maximum 10 bar).

-- Place the Used Oil Collection and Extraction Unit SMN372500 under the transmission.

NOTE:

If extremely dirty ATF flows out when cleaning using compressed air, flush the ATF cooler and lines using clean ATF.